Atec Agilent-N5173B - Manual (Page 16)

16
General Characteristics
Remote programming
Interfaces GPIB IEEE-488.2, 1987 with listen and talk
LAN 1000BaseT LAN interface, LXI Class C compliant
USB Version 2.0
Control languages SCPI Version 1997.0
Compatibility languages Agilent Technologies: N5181A\61A, N5182A\62A, N5183A, E4438C, E4428C, E442xB,
E443xB, E8241A, E8244A, E8251A, E8254A, E8247C, E8257C/D, E8267C/D, 8648 series,
8656B, E8663B, 83711B/12B, 83731B/32B, 83751B/52B, 8340B/41B, 836xx series,
8664A, 8665A/B, 8644A, 8662A/63A
Aeroflex Incorporated: 3410 series
Rohde & Schwarz: SMR, SMF100A ,SMB100A, SMBV100A, SMU200A, SMJ100A,
SMATE200A, SMIQ, SML, SMV
Anritsu: MG369xA/B/C
Power requirements
100 or 120 VAC, 50 or 60 Hz, 400 Hz
220 or 240 VAC, 50 or 60 Hz
280 Watts maximum
Operating temperature range
0 to 55 °C
Storage temperature range
–40 to 70 °C
Operating and storage altitude
Up to 15,000 ft or 4,600 m
Environmental stress
Samples of this product have been type tested in accordance with the Agilent Environmental Test Manual and verified to be robust
against the environmental stresses of storage, transportation, and end-use; those stresses include but are not limited to temperature,
humidity, shock, vibration, altitude, and power line conditions. Test Methods are aligned with IEC 60068-2 and levels are similar to
MIL-PRF-28800F Class 3.
Safety
Complies with European Low Voltage Directive 2006/95/EC
• IEC/EN 61010-1, 3rd Edition
• Canada: CSA C22.2 No. 61010-1-12
• USA: UL 61010-1 3rd Edition
EMC
Complies with European EMC Directive 2004/108/EC
• IEC/EN 61326
• CISPR Pub 11 Group 1, class A
• AS/NZS CISPR 11
• ICES/NMB-001