Atec Agilent-DSO8104A - Manual (Page 23)

23
Infiniium Performance Characteristics
(continued)
General characteristics DSO8064A, MSO8064A, DSO8104A, MSO8104A
Temperature
Operating 0°C to + 50°C
Non-operating –40°C to + 70°C
Humidity
Operating Up to 95% relative humidity (non-condensing) at +40°C
Non-operating Up to 90% relative humidity at +65°C
Altitude
Operating Up to 4,600 meters (15,000 feet)
Non-operating Up to 15,300 meters (50,000 feet)
Vibration
Operating Random vibration 5-500 Hz, 10 minutes per axis, 0.3 g(rms)
Non-operating Random vibration 5-500 Hz, 10 minutes per axis, 2.41 g(rms); resonant search 5-500 Hz,
swept sine, 1 octave/minute sweep rate, (0.75g), 5 minute resonant dwell at 4 resonances
per axis
Power 100-240 VAC, ± 10%, Cat II, 47 to 440 Hz; Max power dissipated: 390 W
Weight Net: 13.4 kg (29.5 lbs.)
Shipping: 16.4 kg (36.1 lbs.)
Dimensions (excluding handle) Height: 216 mm (8.5 in); width: 437 mm (17.19 in); depth: 440 mm (17.34 in)
Safety Meets IEC1010-1 +A2, CSA certified to C22.2 No.1010.1, Self certified to UL 3111
* Denotes Warranted Specifications, all others are typical. Specifications are valid after a 30-minute warm-up period and ±10°C from firmware calibration temperature.
1 Rise time figures are calculated from t r = 0.35/bandwidth.
2 Magnification is used below 5 mV/div range. Below 5 mV/div, full scale is defined as 40 mV. Full scale is defined as the major attenuator setting above an intermediate setting.
(Major settings 50
Ω: 10 mV, 20 mV, 50 mV, 100 mV, 200 mV, 500 mV, 1 V, 1 MΩ: all of the above plus 2 V).
3 Vertical resolution for 8 bits = 0.4% of full scale, for 12 bits = 0.024% of full scale.
4 The dc gain accuracy decreases 0.08% of full scale per degree C from the calibration temperature.
5 Maximum 2-channel memory depth only available at maximum 2-channel sample rate. Maximum each channel memory depth available at any selectable sample rate.
6 Valid for vertical ranges > 5 mV / div.
7 FFT amplitude readings are affected by input amplifier roll-off; DSO8064A and MSO8064A: –3 dB at 600 MHz, with amplitude decreasing as frequency increases above 600 MHz;
DSO8104A and MSO8104A: –3 dB at 1 GHz, with amplitude decreasing as frequency increases above 1 GHz.
8 Noise floor varies with memory depth and with averaging on or off.