Atec Agilent-DSO8104A - Manual (Page 16)

16
Infiniium Active Probing
Active probes
Probing high-frequency signals
becomes more challenging as
the variety of test points and
the frequencies of the signals
continue to grow. Probes need to
be lightweight, small, affordable,
and offer the accessories and
probe tips you require to get your
job done easily.
For high-speed differential
signal measurements, the 1130A
InfiniiMax differential probe
amp, with its variety of probe
heads, is a perfect compliment
to the Infiniium 8000 Series
oscilloscopes. Its 1.5 GHz
bandwidth, extremely low input
capacitance, high common mode
rejection and the patented
resistor probe tip technology
provide ultra-low loading of the
DUT and superior signal fidelity.
The 1156A active probe is a small,
low-mass, active probe also with
1.5 GHz bandwidth. The probe
offers a flat frequency response
across the entire probe
bandwidth, even with a variety
of accessories attached, giving
you accurate insight into your
high-speed measurement. Agilent
offers a variety of probe tips to
help you probe any test point.
For more information on probing
solutions, see the Infiniium
Oscilloscope Probes, Accessories,
and Options Selection Guide
(Agilent publication number
5968-7141 EN/EUS).
Model Probe bandwidth System bandwidth Single-ended/differential
1156A 1.5 GHz 1 GHz with MSO8104A and DSO8104A single-ended
600 MHz with MSO8064A and DSO8064A
1130A 1.5 GHz 1 GHz with MSO8104A and DSO8104A both*
600 MHz with MSO8064A and DSO8064A
* Depending on probe head used
† For a complete probing solution, also order a connectivity kit or individual probe head(s).