Atec Agilent-DSO8104A - Manual (Page 13)

13
Infiniium Advanced Application Software
(continued)
Ethernet performance validation and
compliance software (N5392A)
The N5392A Ethernet electrical
performance validation and
compliance option provides you
with a fast and easy way to verify
and debug your 1000Base-T,
100Base-TX and 10Base-T
Ethernet designs. The Ethernet
electrical test software, allows
you to automatically execute
Ethernet physical-layer (PHY)
electrical tests, and it displays the
results in a flexible report format.
In addition to the measurement
data, the report provides a
margin analysis that shows how
closely your device passed or
failed each test. The Agilent
N5395B Ethernet electrical
compliance test fixture and
N5396A Gigabit Ethernet jitter
test cable are available for making
the physical connection between
the Infiniium oscilloscope and the
device under test.
USB 2.0 performance validation and
compliance software (N5416A)
The Infiniium USB 2.0 electrical
performance validation and
compliance option provides a fast
and reliable way to verify USB
electrical specification
compliance for USB 2.0 devices,
hosts, and hubs. The Infiniium
USB 2.0 test option executes the
official USB-IF MATLAB scripts
with MATLAB’s runtime engine
embedded in the oscilloscope.
Results are displayed in a flexible
report format with margin
analysis. The Infiniium 8000
Series with bandwidths of
600 MHz and 1 GHz can
appropriately test USB 2.0 low
and full speed buses. The E2646A
SQiDD test fixture is available for
making the physical connection
between the Infiniium oscilloscope
and the device under test.
Vector signal analysis software for
Infiniium (89601A)
The 89601A vector signal analyzer
(VSA) software, used with the
Infiniium 8000 Series, enables
flexible signal analysis and
demodulation up to 1 GHz
bandwidth for troubleshooting
wideband modulated signals in
radar and communications
applications. The solution
provides:
• Flexible demodulation for
measuring constellation
diagrams, carrier offset, and
frequency error for QPSK
signals, 256 QAM signals and
much more
• Display formats including
spectrogram, phase vs. time,
and frequency vs. time for
rapid insight into complex
signal behavior
• Error vector magnitude
measurements (with 89601A
option AYA)
• Markers to facilitate frequency,
amplitude, offset, power,
phase, other measurements
• Time gating that allows you
to select specific portion of
signals for signal analysis
• Variable frequency resolution