Atec Agilent-DSO8104A - Manual (Page 15)

15
Infiniium Advanced Application Software
(continued)
Logic analyzer/oscilloscope time
correlation (E5850A optional)
With version 3.30 of logic
analyzer operating system
software, you can easily make
time correlated measurements
between an Agilent 16900 Series
logic analysis system or Agilent
1680/90 Series benchtop logic
analyzer and an Infiniium
oscilloscope without a correlation
fixture. All that is needed are a
cross-over LAN cable and two
BNC cables. Set the logic analyzer
to trigger the oscilloscope or vice
versa and immediately view logic
timing waveforms aligned with
oscilloscope waveforms
simultaneously on the logic
analyzer display. Move global
markers on the logic analyzer
and watch Infiniium’s tracking
markers move automatically in
synch. Move Infiniium’s tracking markers and watch the logic
analyzer’s global markers move
in synch. For the most precise
correlation, the optional E5850A
time correlation fixture can be
used to automatically deskew
logic and scope waveforms to the
best possible accuracy.
VEE Pro with Infiniium (W1140A)
Agilent VEE Pro is a highly
productive, intuitive, graphical
programming environment for
test program development.
Looking for an alternative to
complex programming
environments? VEE simplifies
the tasks required for test
development. VEE comes
pre-installed with a 30-day free
trial license on all Infiniium
oscilloscopes. VEE runs inside
Infiniium’s open Windows XP Pro
operating system and uses the
PCI bus for fast data transfer
from the oscilloscope acquisition
system to the VEE application,
much faster than GPIB. Six
powerful sample programs are
provided on Infiniium hard drive
to get you started with VEE’s
advanced measurement and
analysis capabilities with
embedded MATLAB® scripts.