Atec Agilent-N9923A - Manual (Page 16)

16
Agilent FieldFox Customer Support http://www.agilent.com/find/fieldfoxsupport
N9923AU-122 Add full two-port S-parameter capability to an N9923A.
N9923AU-112 Add QuickCal capability to an N9923A.
N9923AU-305 Add cable and antenna analysis to an N9923A.
N9923AU-302 Add external USB power sensor support to an N9923A.
Power sensor not included.
N9923AU-308 Add vector voltmeter capability to an N9923A.
N9923AU-010 Add time domain analysis and gating
N9923AU-030 Add remote control capability
The following is a list of the calibration kits that are loaded in a standard FieldFox.
Users can add additional calibration kits to their unit using FieldFox Data Link
Software. Note regarding QuickCal: The basic QuickCal, either 1 or 2-port does
not require any standards. For higher accuracy, users can perform QuickCal with
a load.
N9910X-800 T-calibration kit, DC-6 GHz, Type-N(m)
N9910X-801 T-calibration kit, DC-6 GHz, Type-N(f)
N9910X-802 T-calibration kit, DC-6 GHz, 7/16 DIN(m)
N9910X-803 T-calibration kit, DC-6 GHz, 7/16 DIN(f)
85031B Economy calibration kit, DC to 6 GHz, 7 mm
85032E Economy calibration kit, DC to 6 GHz, Type-N, 50-ohm
85032F Standard calibration kit, DC to 9 GHz, Type-N, 50-ohm
85033E Standard calibration kit, DC to 9 GHz, 3.5 mm
85036B Standard calibration kit, DC to 3 GHz, Type-N 75-ohm
85036E Economy calibration kit, DC to 3 GHz, Type-N 75-ohm
85038A Standard calibration kit, DC to 7.5 GHz, 7-16
85039B Economy calibration kit, DC to 3 GHz, Type-F, 75-ohm
85052D Economy calibration kit, DC to 26.5 GHz, 3.5 mm
85054B Standard calibration kit, DC to 18 GHz, Type-N, 50-ohm
85054D Economy calibration kit, DC to 18 GHz, Type-N, 50-ohm
N9923A Upgrade Options
Calibration Kits