Atec Agilent-N9923A - Manual (Page 15)

15
General Information
(continued)
Description Specification Supplemental Information
Headphone Jack Connector 3.5 mm (⅛ inch) miniature audio jack
USB
USB–A (2 ports) Hi–speed USB 2.0
Mini USB (1 port) Hi–speed USB 2.0 Provided for future use.
LAN 100Base-T ONLY 10Base-T is NOT supported
External RJ–45 connector
Programming The built-in LAN interface and firmware,
support data transfer and control via
direct connection to a LAN network.
External Reference
Connector BNC female
Input frequency 10 MHz
Input amplitude range –5 dBm to +10 dBm (nominal)
Impedance 50 Ω (nominal)
Lock Range ±10 ppm of external reference
frequency (nominal)
N9923A FieldFox RF VNA Options
Must select 104 or 106 as a minimum. 104 and 106 are mutually exclusive.
N9923A-104 4 GHz RF vector network analyzer, transmission/reflection:
Includes S11 and S21, mag and phase, one-port and enhanced
response calibration, 2 MHz to 4 GHz.
N9923A-106 6 GHz RF vector network analyzer, transmission/reflection:
Includes S11 and S21, mag and phase, one-port and enhanced
response calibration, 2 MHz to 6 GHz.
N9923A-112 QuickCal: Adds one-port QuickCal and two-port QuickCal
(two-port QuickCal only if option 122 is ordered).
N9923A-122 Full two-port S-parameters: Adds S12, S22, and full two-port
calibration.
N9923A-302 External USB power sensor support: Enables USB port to be
used for power measurements. Power sensor not included.
N9923A-305 Cable and antenna analyzer: Adds Cable and Antenna Test
(CAT) mode, which allows for DTF measurements.
Measurements include DTF (dB), RL & DTF, RL (dB), VSWR, DTF
(VSWR), Cable loss (1-port), Insertion loss (2-port), and DTF (linear).
N9923A-308 Vector voltmeter: Provides 1-port cable trimming and 2-port
transmission measurements.
N9923A-010 Time domain analysis and gating
N9923A-030 Remote control capability for iOS device, such as iPad, iPhone, or
iPod Touch.