Cable and antenna analyzer (option 305), External usb power sensor support (option 302), Dynamic accuracy – Atec Agilent-N9923A User Manual
Page 10: Description specification supplemental information, Figure 9: dynamic accuracy (specification), Table1: cable and antenna analyzer specifications

10
Dynamic Accuracy
Accuracy of the test port input power, relative to the specified port power.
0.01
0.1
1
10
-80
-70
-60
-50
-40
-30
-20
-10
0
Accuracy (deg)
Relative Port Power with repect to +5dBm (dB)
Phase Dynamic Accuracy - High Port Power
2MHz to 4 GHz
4 to 6 GHz
Figure 9: Dynamic accuracy (specification)
0.001
0.01
0.1
1
10
-80
-70
-60
-50
-40
-30
-20
-10
0
Accuracy (dB)
Relative Port Power with repect to +5dBm (dB)
Magnitude Dynamic Accuracy - High Port Power
2MHz to 4 GHz
4 to 6 GHz
Cable and Antenna Analyzer (option 305)
The following CAT mode performance parameters are in addition to the VNA
mode performance parameters specified above.
Table1: Cable and antenna analyzer specifications
Description
Specification
Supplemental Information
Cable loss
Display range
0 to 100 dB
Resolution
0.01 dB
Distance–to–Fault
Horizontal range
Range = [(number of points
– 1) / frequency span * 2]
* velocity factor * speed of
light
Number of points auto coupled
according to start and stop
distance entered
Horizontal
Resolution
Resolution = Range/
(number of points – 1)
Number of points settable
by user
Bandpass mode
Window types
Maximum, medium, and
minimum windows
External USB Power Sensor Support (option 302)
The external USB power sensor option supports the Agilent Technologies USB
Power Sensors. List of supported sensors available from:
http://www.agilent.com/find/usbsensorsforfieldfox.