Atec Agilent-34972A - Manual (Page 8)

8
An easy-to-use data logger for monitoring
and characterization applications
Data loggers are used to monitor multiple signals (tempera-
ture, voltage, etc.) over extended periods of time to identify
irregularities. Example applications include environmental
chamber monitoring, component inspection, benchtop test-
ing, process troubleshooting, and temperature profiling.
The Agilent 34970A/34972A is easy to use for a multitude
of data logging and monitoring applications, either stand-
alone or with a computer. Its flexible, modular design
makes it scalable from 20 to 120 channels, and lets you
add actuator, digital I/O, and analog output channels for
simple control. Its small size, ruggedized features and USB
memory port on the 34972A make it perfect for portable
applications. Use GPIB (IEEE 488) or RS-232 interfaces
in the 34970A for legacy systems or use the 34972A with
standard LAN and USB interfaces for simple connection
to the PC and support of remote applications. The 34972A
can be set up at remote locations and accessed through
the Web interface on a network connection or through
the USB port by copying instrument configurations and
measurement data results to a USB flash drive.
Better measurements with fewer hassles
Tired of putting up with the mediocre measurement
performance you get with most data loggers or plug-in data
acquisition boards? The 34970A/34972A offers 6½ digits of
resolution and 0.004% basic 1-year dcV accuracy.
Simplify your data gathering with
Agilent BenchLink Data Logger 3 software
Do you want PC-based data logging capability, but don’t
want to spend hours programming? The BenchLink Data
Logger 3 software is the answer. This Windows-based
application is designed to make it a snap to use your PC
for gathering and analyzing measurements. Use it to set
up your test, acquire and archive measurement data, and
perform real-time display and analysis of the incoming
measurements.
A familiar spreadsheet environment makes it easy to
configure and control your tests. And a rich set of color-
ful graphics provides many options for analyzing and
displaying your data—all with point-and-click ease. Set up
multiple graphics using strip charts, histograms, bar and
scatter charts, individual channel results, and more. And
of course you can use BenchLink Data Logger 3 to easily
move data to other applications for further analysis, or for
inclusion in your presentations and reports.
The BenchLink Data Logger software can run connected
to the computer, standalone in the instrument or even over
the network when using the LAN interface on the 34972A.