Atec Agilent-34972A - Manual (Page 11)

11
Software drivers
Your months of test system software development
time need not go to waste. Software drivers that
support (C, C#, Visual Basic, Visual Studio)
® , Agilent VEE
and National Instruments LabView are available for the
34970A/34972A to make integration into your test system
easy. Standard RS-232 and GPIB interfaces on the 34970A
or LAN and USB on the 34972A and SCPI programming
language make integration even easier.
ATE feature checklist
• 3-slot cardcage with 6½ digit (22 bit) internal DMM
• 0.004% basic 1-year dcV accuracy; 0.06% acV
accuracy
• Up to 120 single-ended measurements or 96 matrix
crosspoints in a 3½” high, half-rack instrument
• Eight switch and control modules include low-
frequency and RF multiplexers, matrix and actuation
switches, digital input and output, analog output,
and event recording
• Scan rates up to 250 ch/s
• GPIB and 115 kbaud RS-232 interfaces standard
(34970A)
• Graphical Web interface to speed up test
development and monitor tests remotely (34972A)
• Software drivers available to support Agilent VEE
and National Instruments LabView
• Relay maintenance feature for system maintenance
Compact 60-channel data acquisition system