Also available – Atec Agilent-34972A User Manual

Page 4

Easy to use graphical Web interface (34972A only)

The built-in graphical Web interface provides easy access
and control of the instrument using a Java-enabled Web
browser such as Internet Explorer. Using this interface you
can configure measurements, define and execute scan
lists, or monitor measurement results from anywhere on
the network. Simply enter the instrument host name or
IP address into the browser URL and gain access to the
instrument’s capabilities with simple point and click control
right in your browser.

• Specify per channel measurement configuration
• Define and execute switch scans
• Open, close, or monitor switch positions
• Monitor measurement readings
• View and save data
• Send SCPI commands and view IO command log
• View error queue
• View instrument information like module configuration,

relay counts, firmware revisions, and more

Additionally, since the Web interface is built into the
instrument, you can access it on any operating system
that supports a Web browser without having to install
any special software.

Password protection and LAN lock out are also provided
to limit access. The graphical Web interface makes it easy
to configure measurements, set up and execute scans or
troubleshoot your designs from anywhere on the network.

Free BenchLink Data Logger software
saves you time and money

Now you don’t have to spend your valuable time writing
or configuring software. Agilent BenchLink Data Logger
3 software gives you a familiar Microsoft

Windows

interface for test configuration and real-time data display
and analysis. Even better, the data logging application is
included with every standard Agilent 34970A/34972A.

Event

• Control Instruments
• Send Notiﬁcation(s)
• Stop Scan

Start

34832A BenchLink Data Logger Pro adds limit checking and decision making

Scan List A

(base)

Event

Scan List C

Event

Scan List B

Events

Also available

The BenchLink Data
Logger Pro Software
adds limit checking and
decision making for
more complex applica-
tions. Simply identify
the measurements you
want to acquire, define
limits and actions to
be performed, and then
initiate the process. Your
data is then collected,
evaluated and acted on
real-time.