Associated Equipment 12-1015 Manual - Manual (Page 49)

- 49 -
Model 12-1015 Users’ Manual Version 13.08
Associated Equipment Corp.
5043 Farlin Ave. 800-949-1472(US)
St. Louis, MO 63115 314-385-5178 (Outside US)
12.1 Printing the Test Results
Printing of the Test Results can be done in two ways:
a.) Pressing on the Print Button after doing a particular single test will
immediately print the test results of that single test and not all the
test stored in memory.
b.) Pressing the Print Button after going to the View Last Test selection
in the Select Menu will immediately print all the test results that are
stored in the memory.
Important:
The Analyzer has to be connected to a 12V battery in order to work with its
integrated printer. This is because the printer needs higher Amps to operate
which the PC USB output is unable to provide.
To print just press key on the Analyzer, the printer will start printing.
Note:
To printout on normal computer printer, it has to be connected to the PC
with MODEL 12-1015 software installed. (See Print Results from Normal
Printer – Page 54).
To exit the program, pressing the key at any moment will exit and return back
to the main menu screen (Fig.71).
Figure 76 Figure 77
Results: Good
At 3,000 rpm,
No load Test:
Average Charging
Volts: 14.2V
Press [Enter] to
continue to Loading
Test.
Results: Good
At 2,000 rpm,
Loading Test:
Average Charging
Volts: 13.3V