Associated Equipment 12-1015 Manual - Manual (Page 19)

- 19 -
Model 12-1015 Users’ Manual Version 13.08
Associated Equipment Corp.
5043 Farlin Ave. 800-949-1472(US)
St. Louis, MO 63115 314-385-5178 (Outside US)
Here, selecting SLI (Wet type) battery meant that it tests Starting, Lighting
and Ignition (SLI) batteries e.g. normal flooded types like Wet Low
Maintenance (Sb/Ca), Wet Standard (Sb/Sb) Batteries.
If AGM (Flat/Spiral) is selected, then it will test Wet (MF) Maintenance
Free (Ca/Ca), AGM/Gel Cell VRLA (Ca/Ca) Batteries.
10. Once the selection has been done, it will proceed to the display as shown
in Fig 23:
11. Before selecting the ratings ‘CCA, SAE, EN, IEC, DIN, CA and JIS #’ from
the menu, check the battery specification value. This value can be
checked on the battery labels as some of the examples shown below:
Select Rating
CCA
SAE
DIN
JIS
IEC
EN
CA
Unknown
Figure 23