Associated Equipment 12-1015 Manual - Manual (Page 38)

- 38 -
Model 12-1015 Users’ Manual Version 13.08
Associated Equipment Corp.
5043 Farlin Ave. 800-949-1472(US)
St. Louis, MO 63115 314-385-5178 (Outside US)
4. From the main MENU, select ‘Starter Test’ by scrolling down using
key. The screen will show (Fig.49).
5. Press key to continue and the display will show: (Fig.50)
6. Switch the ignition key to ON and start cranking the engine until it starts.
Immediately after that press key and the results will show as follows
(Figure 51):
Figure 50
Figure 49
Figure 48
Select Menu
New: Clear Memory
Continue Testing
View last Test
Setup Menu
Then press [Enter].
Select Test
Battery Test
Grounding Test
Starter Test
Alternator Test
Then press [Enter].
Starter Test
Battery: 12.45V
Crank engine now
until it starts.
Then press [Enter].