Associated Equipment 12-1015 Manual - Manual (Page 17)

- 17 -
Model 12-1015 Users’ Manual Version 13.08
Associated Equipment Corp.
5043 Farlin Ave. 800-949-1472(US)
St. Louis, MO 63115 314-385-5178 (Outside US)
3. After you have made your choice, selecting “New: Clear Memory” or
“Continue…Test” will proceed to the display below: (Fig. 18)
4. Pressing key once will scroll down to the next item if there is a need
to select it.
5. As an example (Fig.18) the selected item was on “Battery Test” and it is
being highlighted.
6. Press key will proceed to do the battery testing and if it has detected
any surface charge on the battery, it will start to remove and a message is
shown (Fig. 19) below.
Figure 18
Figure 19
Select Test
Battery Test
Grounding Test
Starter Test
Alternator Test
Then press [Enter].
The Analyser is
removing the battery
surface charge now.
Please wait for a
moment!