Alpha Technologies Te45 - Manual (Page 33)

Alpha Technologies Ltd. 057-106-C0 Rev D
Burnaby, British Columbia. Telephone: 604 436 5900 Fax: 604 436 1233. Page 24 of 38
4.12 Wiring, cable management, and connections
This section explains how to install and interconnect the power components within the enclosure. For battery
installation, refer primarily to the manufacturer’s manuals.

Ensure the cables are not routed against any unprotected steel edges.

The cables must be neatly tie-wrapped or contained within a plastic loom.

Run the DC, ground, AC, and data cables in separate conduits.
4.12.1 Alarm connections
Route the alarm cable through the bridge interface to the adjacent enclosure. See the enclosed schematic for alarm
connection details. If necessary, configuration changes can be made at the alarm wiring terminal block.
Figure 22 – Alarm connections