Alpha Technologies Te45 - Manual (Page 22)

Alpha Technologies Ltd. 057-106-C0 Rev D
Burnaby, British Columbia. Telephone: 604 436 5900 Fax: 604 436 1233. Page 13 of 38
3 Transportation and storage
3.1 Packaging
The enclosure and components are shipped on individual pallets and shrink wrapped. The enclosures and
components must not be stacked. Packaging assemblies and methods are tested to International Safe Transit
Association standards.
The pallet is approximately 0.15 m H x 1.22 m W x 1.22 m D (6" H x 48" W x 48" D) and the overall height including
pallet and enclosure is approximately 1.98 m (78").
Batteries are shipped on a separate pallet and packaged according to the manufacturer’s guidelines. Packaging
assemblies and methods have been tested to International Safe Transit Association standards.
3.2 Storage
The weight of the enclosure is written in the specifications. The equipment pallet can be moved using a forklift.
Do not hoist/lift the enclosure with batteries installed.
The warehouse facility may need to be certified for handling the batteries, which are shipped on a separate pallet.
3.3 Inspection
Before unpacking the equipment, perform a visual inspection and note any damage. Unpack the equipment and
inspect the exterior for damage. Contact the carrier immediately if any damage is observed.
Continue the inspection for potential internal damage. Contact the carrier immediately if internal damage is
detected. Then contact Alpha Technologies for advice on the consequence of any damage.
Verify that you have all the required parts before proceeding with the installation.
Call Alpha Technologies if you have any questions: 1-888-462-7487