Alpha Technologies Micro, Micro XL, Micro XL3 UPS - Manual (Page 82)

017-237-B0 Rev A 80
1: Type fbulk.
2: Erase pop-up
appears.
6. In the uBug12 screen, type (all lower case) fbulk and press ENTER. The erase pop-up appears. It
disappears when the Alpha Micro’s memory is erased. If an error message appears, send the fbulk
command again.
7. In the uBug12 screen, type (all lower case) fload(1 space);b and press ENTER. A pop-up appears asking
you to locate the new firmware. Look for a “sx record” (*.sx). Select this new firmware. The fload pop-up
appears.
1: Type fload ;b.
2: Look for a .sx
file.