Alpha Technologies Micro, Micro XL, Micro XL3 UPS - Manual (Page 54)

017-237-B0 Rev A 52
6.10 Operation
The various screens are described on the following pages and operate like Web or Windows-type screens. Point
and click to change the various functions or fields.
The on line indicator shows if you are connected to the Alpha Micro The Alpha UPS Monitor automatically polls
the Alpha Micro to obtain its status. The default setting is polling once every 3 seconds, but you can change this
in the UPS Maintenance-Unit Configuration screen in the “Status Refresh Time” menu.
If a light or lights are illuminated in the Fault or Alarm fields, the Alpha Micro has a malfunction. Hover your mouse
cursor over the light to learn the type of malfunction or double-click on it to go straight to the Alarms & Faults
screen.
To control the unit or change it’s settings or parameters, either click on the On/Off buttons, or choose an item
from a drop down menu. Then click on the Update Settings button.
If you do not click on this button, the change will not happen.
6.10.1 UPS Specifications
This screen displays the various specifications of the Alpha Micro
Figure 27 — Alpha UPS Monitor: UPS Specification screen