Alpha Technologies Micro, Micro XL, Micro XL3 UPS - Manual (Page 30)

017-237-B0 Rev A 28
6.1 Communicating with the Alpha Micro
There are several ways you can communicate with the Alpha Micro UPS:
1. Using the control panel.
2. Using an RS-232 interface, you can access the UPS command line system with Window’s HyperTerminal or
other terminal emulation program.
3. Using an RS-232 serial connection via the Alpha UPS Monitor installed on your computer. The
Alpha UPS Monitor software can be downloaded from www.alpha.ca./downloads/.
4. Using the optional factory-installed communication module, you can communicate with the Alpha Micro over
a company intranet or the internet using a web browser or with SNMP communications.
Figure 19 — Alpha Micro Communication Options
Alpha
Micro
Option 4
Option 4
Option 4
Options
2 & 3
On-Site
Ethernet Connection
Communication
Module
Ethernet Port
Note: FXM Communication Module
is a factory-installed option
CANCEL SCROLL SELECT
Alpha
Micro1000
120/60/N
LINE
Option 1:
Control Panel
RS-232 Port
(Using Alpha UPS Monitor
available at www.alpha.ca)
(Using Web browser for
Ethernet connection
to on-site computer)