Alpha Technologies Micro, Micro XL, Micro XL3 UPS - Manual (Page 31)

29 017-237-B0 Rev A
6.2 Operating the Control Panel
The LCD control panel provides “at a glance” monitoring. This panel, when used along with the CANCEL,
SCROLL and SELECT buttons, allows you to program, make measurements, and troubleshoot the Alpha Micro
The layout is shown in the figure below.
The Alpha Micro is monitored and controlled with a series of menus and submenus. The Menu Tree is shown in
Figure 11. For a tutorial on how to use this panel, see “Replacing the Batteries”.
Figure 20 — LCD Control Panel Logo Screen
A Alpha FXM model name
B
Alpha FXM voltage configuration - 120 VAC or 230 VAC
Alpha FXM Frequency - 50 Hz or 60 Hz
Sense Type setting - Normal (N) or Generator (G); see "Operating the
Alpha Micro", Sense Type.
C Present operating mode - (LINE mode shown) See Figure 10.
D
Control buttons:
SELECT - Pressing SELECT moves you down 1 level in the menu tree
(Table C) or accepts a change when programming.
SCROLL - Pressing SCROLL moves you through the submenus (Table C)
or toggles between choices when programming.
CANCEL - Pressing CANCEL moves you up one level in the menu tree
(Table C).
The Alpha Micro’s operating mode automatically changes as a result of changes in the line or the Alpha Micro’s
operating mode. See Table C and also "Specifications, Boost/Buck/Line Transfer Thresholds”. The LCD panel
automatically updates to reflect this.
D
A
B
C
CANCEL SCROLL SELECT
Alpha 120/60/N
LINE Micro 300