ABUS TVIP41550 PIR network camera - Manual (Page 92)

92
English
10.1 Image Settings
“White balance” Set the value for an optimal colour hue. The following values can be set:
“Auto”: The network camera automatically adjusts
to the colour hue in accordance with the ambient
lighting conditions. This setting is recommended for
most situations.
“Retain current value” The white balance
parameters from the current live image are saved
permanently.
“Brightness, Contrast, Saturation, Sharpness”
Adjust the values according to your lighting
conditions.
“Enable anti-aliasing”
Anti-aliasing is a digital picture improvement filter which enhances the corners and contours of the image
content, allowing a sharper image to be generated.
“Enable noise reduction”
Noise reduction can enhance the video image and improve the picture quality, especially when light
conditions are poor. Select the type and method of picture improvement and use the value to set the extent to
which the picture improvement should enhance the current video image.
To view the changed image settings, click “Preview”. To save the image parameters, click “Save”. To discard
your changes, click “Restore”.
10.2 Privacy masking zones
This function allows you to hide areas
in the video image. You can select 5
areas of any size.
Enable this function by selecting the
“Enable privacy mask” option.
Click “New” to create a new window;
you can then adjust the size. Click
“Save”, to apply the changes.
This function can only be configured if MS Internet Explorer is used as a browser (ActiveX mode).
If the lighting conditions for the camera change, image settings for bad lighting conditions may
compromise the quality of video images in good lighting conditions.