beautypg.com

ABUS AZ6301 Terxon PSTN dialer User Manual

Page 57

background image

57

10.9 Event log

When an alarm call is transmitted successfully, the Terxon PSTN dialer
saves the last message transmission in the event log.

1. Enter your programming code (default: 1234). The following

message is shown in the display:

READY


Press

. The display shows the following:

VIEWLOG-

Press

to display the last event. In this example, message A has

been transmitted to telephone number 3 and confirmed.

A> --3-

IMPORTANT

BLANK in the display means that no events are available. The display
“A>----” indicates that the transmitted message A was not confirmed by
any recipients.

Press

to exit the event log.

Press

to end data entry.