beautypg.com

ABUS AZ6301 Terxon PSTN dialer User Manual

Page 49

background image

49

IMPORTANT

When no telephone number is programmed, the display shows
“BLANK”. Press the

key to delete the programmed telephone

number.

Enter the desired telephone number.

123456

IMPORTANT

Press

for a dial pause of three seconds. This is shown in the

display as a comma. The entry cursor can be moved to the left by
pressing

or to the right by pressing

.


Press the

key to save the entries.

Repeat this procedure for numbers 2, 3 and 4.

Press

to end data entry.

10.1.2 Dialling

mode

This function is used to switch the dialling mode from DTMF (tone
dialling) to pulse dialling. You can also select automatic recognition of
the correct dialling mode (AUTOMATIC setting).

1. Enter your programming code (default: 1234). The following

message is shown in the display:

READY


Press

. The display shows the following:

ENT 1-4


Press

-

to enter telephone numbers 1-4. The display now

changes between the selected telephone number and the programmed
number.

TEL NO 1