Extron Electronics SWP123 - Manual (Page 44)

SWP123 Presentation Switcher • Specifications A-4
Specifications, cont’d
Microphone volume range ........ -55 dB to +9 dB
Microphone DC power ............... 24 V
Master audio output
Gain ................................................ -55 dB to +9 dB
Number/signal type ................... 1 stereo, balanced/unbalanced
Connectors ................................... (1) 3.8 mm captive screw connector, 5 pole
Impedance .................................... 50 ohms unbalanced, 100 ohms balanced
Gain error ..................................... ±0.01 dB channel to channel
Maximum level (Hi-Z) ................ >+24 dBu, balanced at 1%THD+N
Maximum level (600 ohm) ......... >+18 dBm, balanced at 1%THD+N
Control/remote — switcher
Serial control port ........................ RS-232, RS-422, or RS-485 on a 3.8 mm, 5-pole captive screw connector
Baud rate and protocol ............... 1200/2400/4800/9600/19200/38400, 8-bit, 1 stop bit, no parity
Serial control pin configurations 1 = GND, 2 = TX-, 3 = TX+, 4 = RX-, 5 = RX+
IR controller module ................... CTL120-3 (optional)
Program control .......................... Inline control software
General
Power ............................................ 100 VAC to 240 VAC, 50/60 Hz, 15 watts, internal, autoswitchable
Temperature/humidity .............. Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Rack mount .................................. Yes
Enclosure type .............................. Metal
Enclosure dimensions ................. 3.5" H x 19.0" W x 5.5" D (2U high, full rack wide)
8.9 cm H x 48.3 cm W x 14.0 cm D
(Depth excludes connectors and buttons. Width is 17.25"/43.8 cm excluding
rack ears.)
Product weight ............................. 5.5 lbs (2.5 kg)
Shipping weight ........................... 7 lbs (4 kg)
DIM weight
USA/Canada .................... 8 lbs (4 kg)
International ..................... 9 lbs (5 kg)
Vibration ....................................... ISTA 1A in carton (International Safe Transit Association)
Listings .......................................... ETL (UL1950)
Compliances ................................. FCC Class A
MTBF ............................................. 30,000 hours
Warranty ....................................... 3 years parts and labor
All nominal levels are at ±10%.
Specifications are subject to change without notice.