beautypg.com

Remote control, cont’d – Extron Electronics SWP123 User Manual

Page 38

background image

SWP123 Presentation Switcher • Remote Control

Remote Control, cont’d

5-10

b.

Enter the IP Address and Port number of the server PC.

c.

Click OK. The connection is visible in the main window.

d.

Click OK again. The client PC can now be used to control the switcher.

Adjusting response time

The user operating the client PC may want to adjust the time out interval. The
time out interval is the number of seconds that the client waits before
communicating with the server.

To adjust the response time:

1.

From the Communications menu, select Response Time Out.

2.

Select the appropriate time out interval for your network (4–12 seconds).

Selecting a longer interval does not slow down client-server communication.

Stopping communication

The connection between the client PC and the server PC may be closed at any
time from either PC. To stop communications:

From the server PC—

In the Extron Server Software, from the Server menu, select

Close Connection.

From the client PC—

In the ICS100, from the Communications menu, select Close

Connection.