Extron Electronics SWP123 - Manual (Page 27)

SWP123 Presentation Switcher • Windows-based Control Program 4-5
Setting audio gain (input to Master Audio output)
Adjusting the input volume allows you to equalize the audio levels of the various
inputs so that the audio levels do not change dramatically when switching
inputs.
1. From the ICS100 Interface screen (figure 4-1) select Input Volume from the
Controls menu. The Set Input Volume window opens.
Figure 4-4 — ICS100 Set Input Volume window
2. Click the Increment button or the Decrement button, or click and
drag the slider, to adjust the volume of an input device.
3. To set the input volume to factory default levels, click the Reset Volume
button.
4. Close the Set Input Volume window.
Enabling/disabling front panel control
To toggle the front panel controls on and off, select Front Panel Enable from the
Options menu. A check mark indicates that the front panel controls are enabled.
Using Terminal Comm
The Terminal window is used to view ICS100 commands as they are sent to the
switcher, and to view responses as they are received from the switcher. To use the
Terminal window, select Terminal Comm from the Options menu. The Terminal
window opens.
In addition to viewing commands that are sent and received from the ICS100
Control Program, the Terminal window also allows you to save macro commands
or a communication session and recall it for repeated use. Refer to ICS100
Control Program Help for additional information on terminal communication.