Extron Electronics SW MTP T Series User Guide - Manual (Page 7)

SW MTP T Series Switchers • Introduction
Introduction, cont’d
SW MTP T Series Switchers
2
Chapter Two
Installation
Mounting the Switcher
Rear Panel Features and Connections
TP Cable Termination
1-4
Recommended transmission ranges at 60 Hz
MTP R 15HD A and MTP RL 15HD A receivers
Composite,
S-video,
Component
640 x 480
<300'
(91.4 m)
>350'
(106.7 m)
800'
(243.8 m)
1000'
(304.8 m)
700'
(213.4 m)
750'
(243.8 m)
800 x 600
<300'
(91.4 m)
>350'
(106.7 m)
550'
(167.6 m)
650'
(198.1 m)
1024 x 768
<300'
(91.4 m)
>350'
(106.7 m)
500'
(152.4 m)
600'
(182.9 m)
1280 x 1024
<250'
(76.2 m)
>300'
(91.4 m)
350'
(106.7 m)
450'
(121.9 m)
1600 x 1200
<250'
(76.2 m)
>300'
(91.4 m)
300'
(91.4 m)
450'
(137.1 m)
Video
format
Pre-Peak
off
Pre-Peak
on
Max. range
(high quality)
Max. range
(variable quality)
The recommended distance when using VTR001
receivers varies. Refer to the VTT001 and VTR001
manual.
Features
• Up to two, four, or six inputs, depending on the model
• Input sensing and reporting on the RS-232 port
• Auto switch mode (button or remote selectable)
• 9-pin contact closure/RS-232 remote control connector
• Rack- and under-desk mountable
• Worldwide external power supply
• Input connectors – VGA, female 15-pin HD
• Output connectors
! TP output — RJ-45
! Audio output — 3.5 mm, captive screw
• VGA—UXGA video (and Mac and Quadra computer
video with optional Mac/VGA Adapter (part #26-340-01)
• Tri-level or bi-level sync