Through-furniture mounting, Projector mounting, Wall mounting – Extron Electronics USB Extenders User Guide User Manual
Page 21
Through-furniture Mounting
The transmitter or receiver can be mounted through a desk or other furniture using an
optional Extron Through-Desk Mounting Kit for quarter-rack or half-rack width products (see
). To mount the USB Extenders follow the instructions provided with the
mounting kit.
Projector Mounting
The receiver can be mounted on a projector bracket using either of the following optional
Extron projector mounting kits:
•
PMK 300 multi-product pole mount kit
•
PMK 350 low profile, multi-product pole mount kit
To mount the USB Extenders on a projector mount, follow the instructions provided with the
mounting kit.
Wall mounting
The USB Extender AAP and Decora transmitter and receiver can be installed in an electrical
wall box.
The installation must conform to national and local electrical codes and to the wall plate size
requirements.
The following Underwriters Laboratories (UL) guidelines pertain to the installation of the wall
mount transmitters and receivers into a wall or furniture.
•
Do not connect these units to a centralized DC power source or use beyond their rated
voltage range.
•
These units must be installed in UL listed junction boxes.
•
These units must be installed with conduit in accordance with National Electrical Code.
USB Extenders • Reference Information
15