beautypg.com

Global configurator online training, Other resources, Instructions, information, and assistance – Extron Electronics IPL 250 Setup Guide User Manual

Page 9: Software for ir drivers, Resources for setting up touchpanels, Global configurator online training -5

background image

1-5

Refer also to the IPL 250 Reference Manual at www.extron.com.

IPL 250 • Introduction

To install Global Configurator from an Extron Software Products disk if Autorun

is

not enabled on your PC:

1

. Insert the Extron Software Products disk into your drive.

2

. From the Windows desktop, open My Computer and select the appropriate

disk drive.

3

. Double click launch.exe.

4

. Wait for the Extron Software Products page to load.

5

. Click on the Software icon.

6

. Scroll down to the Global Configurator description and click the Install link

in the far right column.

7

. Follow the remaining system prompts.

Global Configurator online training

1

. Go to

www.extron.com

.

2

. Log in using your e-mail address and Extron password.

3

. Click the Reseller-only tab.

4

. Click Training and Education.

5

. Click On-Demand Training.

6

. Click the Global Configurator icon.

Other Resources

Instructions, information, and assistance

A checklist of basic setup steps is on the next page for your reference. For

additional information and step-by-step instructions, refer to the Global

Configurator Help

file and the IPL 250 Reference Manual. If you have questions

during installation and setup, you can call the

Extron S3 Sales & Technical

Support Hotline

or the

Extron S3 Control Systems Support Hotline

.

Software for IR drivers

If you need to create IR device drivers that are not already available in the

extensive selection of drivers in the driver package, download the Extron

IR Learner software. Follow the directions in the IR Learner's help file to create a

driver by using the device's remote control and the IR receiver port on the front

panel of the IPL 250.

Resources for setting up touchpanels

If Extron TouchLink touchpanels are part of an A/V system with the IPL 250,

download the Extron GUI Configurator software and read the GUI Configurator

Help

file. You will also benefit from reading the TLP 700MV and TLP 700TV

TouchLink Touchpanel User's Manual

and the TLP 700MV and TLP 700TV setup

guides.