Extron Electronics IPL 250 Setup Guide - Manual (Page 8)

Introduction, cont’d
1-4
Refer also to the IPL 250 Reference Manual at www.extron.com.
IPL 250 • Introduction
System requirements
The minimum system requirements for the PC on which you install Global
Configurator include:
• Intel
® Pentium ® III, 1 GHz processor
• 512 MB of RAM
• 50 MB of available hard disk space
• A network connection with a minimum data transfer rate of 10 Mbps;
100 Mbps is recommended.
• Microsoft ® Windows ® 2000 SP4, Windows XP SP2, or Windows Vista ®
C Do not run Global Configurator software on a PC that uses an earlier
version of Windows.
• Microsoft Internet Explorer ® 6.0 with ActiveX ® enabled
N If ActiveX is not enabled, you may get a prompt from the browser, or you will
see the “Please wait while the files are loading...” message in the GlobalViewer
control page.
• Microsoft Windows Script 5.6
Installing Global Configurator
Global Configurator software is available free from Extron.
To download and install Global Configurator on your PC:
1
. Go to www.extron.com
2 . Click the Download tab.
3 . Click the IP Link ® Software icon.
4 . Click the Global Configurator icon.
5 . Click the Download Now button.
6 . Complete the personal information form.
7 . Click the Download GCSWxxxxx.exe button.
8 . Follow the remaining system prompts.
To install Global Configurator from an Extron Software Products disk if Autorun
is enabled on your PC:
1
. Insert the Extron Software Products disk into your disk drive.
2 . Wait for the Extron Software Products page to load.
3 . Click on the Software icon.
4 . Scroll down to the Global Configurator description and click the Install link
in the far right column.
5 . Follow the remaining system prompts.