beautypg.com

Preliminary – Extron Electronics IPL Pro Series User Guide PRELIMINARY User Manual

Page 9

background image

IPL Pro Series • Introduction

3

Network and configuration features

Global compatibility — The IPL uses industry standard Ethernet communication

protocols, including DHCP, DNS, HTTP, HTTPS, ICMP, NTP, SFTP, SMTP, SNMP, SSH,
TCP/IP, and UDP/IP.

Embedded web pages — The IPL embedded web pages include online diagnostics

and monitoring of basic features.

Remote equipment management — The IP Link Pro connection allows you

to remotely manage, monitor, and control several Ethernet-enabled products such
as projectors, cameras, video conferencing equipment, switchers, and other AV
equipment. The IPL provides support for the following:

TCP and UDP connections

Password-protected TCP connections

Up to eight Ethernet devices at a time depending on the configuration mode
(GC Professional or GC Plus)

Connection via IP address or host name

Multi-level password protection — Allows security to be set based on user roles.

System asset management — The software/control processor/configured system

allows you to control, monitor, and schedule various functions of devices in the system.

E-mail notification — The IPL can be set up to send e-mail notifications, such as a

notice that a projector has been disconnected or the projector lamp has been used for
a designated number of hours.

Each IPL Pro Series control processor offers up

to 512 MB of flash memory for storing Extron
GlobalViewer and user-supplied web pages,
configuration settings, and device drivers.
Data in flash memory is served at a transfer
rate of 6 Mbps (megabits per second).

SDRAM: 512 MB
Flash: 512 MB

PRELIMINARY