Extron Electronics Extender Plus Series User Guide - Manual (Page 17)

Extender Plus Series • Installation and Operation 11
4. Repeat steps 1 , 2 , and 3 to mount other AAPs. Cover any openings in the faceplate
with blank plates (provided with the faceplate or HSA device).
5. Be sure to include the AAP connectors as part of the installation pretest before final
installation of the faceplate.
For more detailed installation information, see the installation guide shipped with the
faceplate or the HSA.
Mounting the Extender Plus D
1. Remove power from the line driver by disconnecting the power supply.
2. Place the Extender Plus D through the opening in the wall or furniture and into the wall
box. Take care not to damage the output cables, which fit behind the line driver at the
back of the wall box.
3. Mount the Extender Plus D to the wall box with machine screws as shown in figure 6.
COMPUTER IN
AUDIO IN
Wall opening
is flush with
edge of box.
Wall Box
Decora
Wall Plate
Extron
Extender Plus D
VGA-QXGA
Line Driver
with Audio
Figure 6. Mounting the Extender Plus D to the Wall Box
4. Attach the Decora ® wall plate to the Extender Plus D as shown in figure 6.
5. Reconnect the power supply and restore power to the equipment.