Extron Electronics Matrix 6400 Series - Manual (Page 31)

Chapter 3 • Using the FPC 1000 Front Panel Controller
Extron • Matrix 3200/6400 Series Switchers • FPC 1000 • User’s Manual
Status Menu – MKP Mode
The Remote button displays information about the remote keypads and panels.
The example in Figure 3-17 shows the address, mode, configuration and
currently selected input number for each MKP/MCP 1000 on the system.
Address = This is the number programmed into that MKP 1000 or MCP 1000.
Mode = Each MKP 1000 or MCP 1000 is programmed to one of 3 modes:
Output, Room Preset or Global.
Config = For Output mode, this is the local output number assigned to this MKP/
MCP 1000. For Room Preset mode, this is one of 10 presets currently
assigned to this MKP 1000 or MCP 1000 “Room”. “Config” does not apply to
Global mode.
Input = the input number currently selected by the MKP 1000.
To get here from the Main Menu,
press:
• Status
• Remotes
Figure 3-17. Status/Remotes menu showing MKP/MCP 1000s and their status.
Update – This button checks for the latest MKP 1000 and MCP 1000 status and
updates the displayed information.
ESC – Press ESC to return to the previous status menu.
_______ See MKP 1000 User’s Manual (68-355-01) or MCP 1000 User’s Manual
(68-456-01) for more information.
3-18