Extron Electronics Matrix 6400 Series - Manual (Page 20)

Using the FPC 1000 Front Panel Controller • Chapter 3
Matrix 3200/6400 Series Switchers • FPC 1000 • User’s Manual • Extron
Global Presets Menu
Press any menu title
button at any time
to “escape” without
making changes.
To get here from the Main Menu,
press:
• Presets
Displayed information may vary
depending upon system model,
options and setup.
Instruction message appears here >
Use option selections with buttons >
Figure 3-6. Global Presets menu
The 32 possible Global Preset numbers are displayed with their given names.
The selected Preset is highlighted in the center of the screen. Use the speed
knob to scroll through the selections. Each of the three options at the bottom of
the screen will bring up an appropriate menu.
S a v e
To review or edit, press Save. This menu allows the
name of the selected preset to be changed. The knob
symbol appears over the preset name. Use the knob to
display the desired character and then press the (
)
buttons to step to the next position and change that
character, etc. Use the Caps button to toggle the letter
between upper and lower case. The instruction message
is: “Enter Name – Take/ESC to Execute/Abort”. Press
Take when finished.
R e c a l l
To activate the selected Preset, press Recall. The
response message is: “Preset recalled”
D e l e t e
This button changes the preset name to “unassigned”.
_______ The Room option will only appear if Rooms have been set up through Extron’s
virtualization control software.
R o o m
Press the Room button. The description at the top is:
“Save/Recall Room Presets – Name Presets”.
The next page shows an example of a Room Preset menu.
3-7