Extron Electronics Matrix 6400 Series User Manual
Page 26
Using the FPC 1000 Front Panel Controller • Chapter 3
Matrix 3200/6400 Series Switchers • FPC 1000 • User’s Manual • Extron
3-13
Misc Menu
Press any menu title
button at any time
to “escape” without
making changes.
Instruction message appears here >
Use option selections with buttons >
Figure 3-12. Misc menu (shown with System Reset selected)
Use the scroll buttons or the speed knob to select one of the four options from
this menu. This example shows System Resets highlighted. Press Take to
display the menu for the selected function.
S y s t e m R e s e t s
See Page 3-16 for details on the functions that can be reset.
L C D A d j u s t m e n t s
See Page 3-14 to make adjustments that relate to the LCD panel.
S e c u r i t y L o c k o u t
This selection brings up a menu that asks for a password. Use the speed knob to
select a character and the left/right buttons to step to the next character position.
Press Take when finished. If the password is incorrect, the “Enter Password”
message remains. If the password is correct, a menu appears to allow Executive
Mode to be activated or deactivated. See Page 3-15 for details on the different
security features.
Auto Test Output Mode
This selection allows one input to be temporarily selected and tied to all outputs
for testing purposes. The flow diagram to the left shows the steps required to set
up a test of all outputs. For example, input #9 could be a VTG 200 (Video Test
Generator) to send the test pattern to all outputs at the same time.
1. From the Misc menu, select Auto Test Output Mode and press Take.
2. Select the input number to tie to all outputs and press Take. The tie is made
to all outputs, overriding previous ties and the screen message changes to
“Press ESC when done testing”.
3. Press the ESC button to return the system to its previous state. All ties that
were previously active are reconnected.
Auto Test Output Mode
(Auto Test Output Mode)
to tie to all outputs
Follow instructions for
selected item.
System Reset