beautypg.com

Part numbers and accessories, Included parts, Optional accessories – Extron Electronics DVC 501 SD User Guide User Manual

Page 35: Mounting the dvc 501 sd converter, Rack mounting, Included parts optional accessories, Mounting the, Dvc 501 sd converter, In the “refer, Ol cable (uc50' or uc100'; see

background image

DVC 501 SD • Reference Information

29

Part Numbers and Accessories

Included Parts

Description

Part Number

DVC 501 SD

60-1033-01

Rubber feet (not attached) (4)
IEC power cord (1)
5-pole captive screw connectors (2)
DVC 501 SD Setup Guide

Optional Accessories

These items can be ordered separately:

Description

Part Number

RSU Universal Rack Shelf Kit

60-190-01

RSB Basic Rack Shelf

60-604-02

MBU 125 Under-desk Mounting Kit

70-077-01

MBD 129 Through-desk Mounting Kit

70-077-02

UC50' Universal Projector Control cable, 50' (15.2 m)

26-518-01

UC100' Universal Projector Control cable, 100' (30.4 m)

26-518-02

Mounting the DVC 501 SD Converter

Rack Mounting

UL guidelines for rack mounting

The following Underwriters Laboratories (UL) guidelines pertain to the installation of the
DVC 501 SD in a rack:

Elevated operating ambient temperature — If the equipment is installed in a closed
or multi-unit rack assembly, the operating ambient temperature of the rack environment
may be greater than room ambient temperature. Therefore, consider installing the
equipment in an environment compatible with the maximum ambient temperature
(TMA) specified by the manufacturer.

Reduced air flow — Install the equipment in the rack so that the amount of air flow
required for safe operation of the equipment is not compromised.

Mechanical loading — Mount the equipment in the rack so that uneven mechanical
loading does not create a hazardous condition.

Circuit overloading — When connecting the equipment to the supply circuit, consider
the effect that circuit overloading might have on overcurrent protection and supply
wiring. Consider equipment nameplate ratings when addressing this concern.

Reliable earthing (grounding) — Maintain reliable grounding of rack-mounted
equipment. Pay particular attention to supply connections other than direct connections
to the branch circuit (such as the use of power strips).