Xylem ProLab 2000 - Manual (Page 84)

Operation ProLab 2000
84 ba75577e05 11/2013
Terminating the
automatic storage
function prematurely
Proceed as follows to switch off the automatic storage function before
the adjusted storage duration has expired:
4.9.3 Reading the measurement data storage
You can select the contents of the manual or automatic measurement
data storage by means of different filter criterions and
 read them out on the display, and
 download them to the interface.
Each measurement data storage has a separate erasure function for
the entire contents, independent of the filter settings.
Editing the
data storage
The data storage is edited in the System / Data storage menu.
In the measured value display, open the system menu with
_
>. With the or
_
> key you can move directly to the
menu for the manual or automatic data storage.
Note
The settings are explained here using the manual storage as an
example. The same settings and functions are available for the
automatic storage.
1 With
_
> open the following window.
2 Select and confirm Yes with <
▲><▼> and
The meter switches to the measured value display.
The automatic storage function is terminated.
Stop automatic storage?
Yes
No
Warning