Xylem ProLab 2000 - Manual (Page 110)

Technical data ProLab 2000
110 ba75577e05 11/2013
Stand March 3, 2010 Translation of the legally binding German version
Note
The measuring ranges and accuracy values specified here apply
exclusively to the meter. The accuracy of the sensors has also to be
taken into account.
Accuracy (± 1 digit) Variable Accuracy
D.O. concentration
[mg/l] ± 0.5 % of measured value
at ambient temperature + 5 °C ... + 30 °C
Saturation [%] ± 0.5% of measured value
when measuring in the range of ± 10 °C
around the calibration temperature
D.O. partial pressure
[mbar] ± 0.5 % of measured value
at ambient temperature + 5 °C ... + 30 °C
Correction functions Temperature
compensation Accuracy better than 2 % at 0 ... + 40 °C
Salinity correction 0 ... 70.0 SAL
Air pressure
correction Automatic through integrated pressure
sensor in the range of 500 ... 1100 mbar
FCC Class A Equipment Statement
Note: This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own
expense.
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.