Xylem ProLab 2000 - Manual (Page 70)

Operation ProLab 2000
70 ba75577e05 11/2013
4 Immerse the conductivity measuring cell in the control standard
solution, 0.01 mol/l KCI.
5 Press
6 Wait for the end of the measurement with Stability control or
accept the calibration value with
i ).
7 You have the following options:
 Accept the new calibration values with
Subsequently, the calibration record is displayed and
downloaded to the interface at the same time.
 To switch to the measured value display without accepting
the new calibration values, press or .
[i] Cell constant = 0.475 1/cm
[i] Immerse sensor in solution
Continue
[i] Cell constant = 0.481 1/cm
[i] Temperature =24.8 °C
Terminate stability control
[i] Cell constant = 0.481 1/cm
i Sensor+++
Accept