Xylem ProLab 2000 - Manual (Page 32)

Operation ProLab 2000
32 ba75577e05 11/2013
4.4 System settings (system menu)
The system menu comprises the following settings:
 Data storage (see page 32)
 Display (see page 32)
 System (see page 34).
4.4.1 Data storage
This menu contains all functions to display, edit and erase stored
measured values and calibration records.
Note
Detailed information on the data storage functions of the ProLab 2000
is given on page 80.
4.4.2 Display
With the aid of the Display submenu, you can modify the measured
value display to meet your requirements. When doing so, you can
display or hide the following elements:
 Individual measured parameters
 Date indication in the status line
 Time indication in the status line
Settings In the measured value display, open the system menu with
_
>. After completing the settings, switch to the measured value
display with .
Menu item Setting Description
Display / pH: On
Off Display of the pH/ISE measuring
window.
This menu item is only visible if
the combination electrode and
an additional sensor are
connected.
Display / Cond: On
Off Display of the conductivity
measuring window.
This menu item is only visible if a
conductivity measuring cell is
connected.