YSI TruLab pH 1110 - Manual (Page 35)

TruLab pH 1110 Reset
ba76155e01 03/2014
35
Measurement and system settings that can be reset
The following settings are reset to the delivery condition (default):
• Measurement settings
• System settings
• Calibration data
Recalibrate after performing a reset.
Measurement settings Default
Display during calibration (bUFF ) pH (nominal buffer value)
Unit of the value for the slope (SLO ) mV/pH
Unit of the value for the zero point
(ASY ) mV
Measured value resolution (pH rES) 0.000
Measured value resolution (U rES) 0.0
Unit of the measured temperature
value (Unit ) °C
Calibration interval (Int.C ) 7 d
System settings Default
Switch-off interval (t.Off ) 1 h