YSI TruLab pH 1110 - Manual (Page 15)

TruLab pH 1110 Operation
ba76155e01 03/2014
15
4.1.4 Socket field
4.2 Switching on the meter
1. Switch on the meter with .
The meter performs a self-test.
The meter switches to the measuring mode (measured value display).
2. Connect the sensor.
The meter is ready to measure.
4.3 Switching off the meter
1. Switch off the meter with .
The meter is switched off.
1 pH electrode
2 Reference electrode
3 Temperature sensor
4 Power pack
5 Service interface
1 2 3 4 5
8 4 2
2 9 9 6
pH
°C
TP
AR