3 calibration interval, 2 measurement settings (orp), 1 changing the settings for orp measurements – YSI TruLab pH 1110 User Manual
Page 31: Calibration interval, Measurement settings (orp), Changing the settings for orp measurements
TruLab pH 1110
Settings
ba76155e01
03/2014
31
7.1.3
Calibration interval
The calibration evaluation is displayed as a sensor symbol.
The sensor symbol flashes after the adjusted calibration interval has expired.
It is still possible to measure.
7.2
Measurement settings (ORP)
7.2.1
Changing the settings for ORP measurements
1.
Open the setting menu in the measured value display with
The first setting is displayed.
2.
Indicate the required setting with
3.
To change the current setting, press <><>.
4.
Confirm the setting with
The next setting is displayed.
5.
Change or confirm the other settings.
or
Quit the setting menu with
The settings are stored.
List of the settings for ORP measurements
The settings for ORP measurements are in the same setting routine as the
settings for pH measurements.
Default settings are printed in bold.
The calibration interval is set with the measurement settings (see
section 7.1 M
To ensure the high measuring accuracy of the measuring system,
calibrate after the calibration interval has expired.
When the last setting is confirmed, the setting menu is auto-
matically quit.