YSI TruLab pH 1110 - Manual (Page 16)

Operation TruLab pH 1110
16
ba76155e01 03/2014
4.4 Navigation
4.4.1 Operating modes
The meter has the following operating modes:
4.4.2 Measuring mode (measured value display)
The following functions are available in the measuring mode (measured value
display):
• Change the display in the selected measuring window (e. g. pH <-> mV) by
pressing
• To open the measurement settings, press (long pressure).
• To open the system settings, press (long pressure).
4.4.3 Setting mode
The following functions are available in the setting mode:
• To change the current setting, press <><>.
• Confirm the setting with .
The next setting is displayed.
The settings are stored.
When the meter is powered by the batteries, it switches itself off
automatically after an adjustable interval to save the batteries (see
section Automatic switch-off function, page 32).
Operating mode Description
Measuring The measurement data of the connected sensor are
shown in the measured value display
Calibration The course of a calibration with calibration informa-
tion, functions and settings is displayed
Transmitting data The meter transmits measuring data and calibration
records to a USB-B interface automatically or man-
ually.
Setting A setting is displayed.