1 switching on the maintenance condition, 2 switching off the maintenance condition, Switching on the maintenance condition -42 – YSI IQ SensorNet DIQ/CR3 User Manual
Page 56: Switching off the maintenance condition -42, Ee section 4.9.2, Section 4.9.1), See section 4.9.2
Settings
MIQ/CR3; DIQ/CR3
4 - 42
ba76032e01
01/2012
4.9.1
Switching on the maintenance condition
4.9.2
Switching off the maintenance condition
1
Call up the measured value display with
m
.
2
Select the sensor you want to switch on the maintenance
condition for with
d
. The measured values of the sensor do
not flash.
3
Open the 300 - Display/Options menu with
g
.
4
Using
d
, highlight the menu item, Switch maintenance
condition on/off or Maintenance of sensor S0x and confirm with
g
. A window that informs you about the maintenance
condition opens up.
5
Confirm Continue with
g
.
The selected sensor is in the maintenance condition. Linked
outputs are frozen.
6
Call up the measured value display with
m
.
The measured values of the sensor flash.
1
Call up the measured value display with
m
.
2
Select the sensor you want to switch off the maintenance
condition for with
d
. The measured values of the sensor
flash.
3
Open the 300 - Display/Options menu with
g
.
4
Using
d
, highlight the menu item, Switch maintenance
condition on/off or Maintenance of sensor S0x and confirm with
g
. A window that informs you about the maintenance
condition opens up.
5
Confirm Continue with
g
.
The maintenance condition of the selected sensor is switched
off. Linked outputs are released.
6
Call up the measured value display with
m
.
The measured values of the sensor do not flash.