5 setting the relay outputs, Setting the relay outputs -15, Section 4.5 – YSI IQ SensorNet DIQ/CR3 User Manual
Page 29: T (see section 4.5
MIQ/CR3; DIQ/CR3
Settings
4 - 15
ba76032e01
01/2012
4.5
Setting the relay outputs
The following steps describe operation with the 2020 XT system. With
the System 182 XT, the outputs of the DIQ/CR3 can be found directly
under the Settings menu (see system operating manual of the DIQ/
S 182 XT).
Fig. 4-15 150 - Settings of outputs and links
1
Call up the measured value display with
m
.
2
Open the Settings menu with
s
.
3
Highlight the Settings of outputs and links menu item with
d
and confirm with
g
. The Settings of outputs and links display
appears.
4
Highlight the Feature column with
d
and confirm with
g
.
5
Highlight a line for a relay output (Rx) in the Feature column
with
d
and confirm with
g
.
The Settings of outputs and links display opens.
6
Highlight the Relay function menu item with
d
and confirm
with
g
.
7
Select one of the functions in the following list with
d
and
confirm with
g
.