YSI IQ SensorNet DIQ/CR3 - Manual (Page 50)

Settings MIQ/CR3; DIQ/CR3
4 - 36 ba76032e01 01/2012
Io 0 ... 20 mA Current value on the
output if the
measured value
equals the Nominal
value
ti 0 ... 9999 s Hold-back time:
Integral part of the
controller
(0 = not effective)
td 0 ... 9999 s Reset time:
Derivative part of the
controller
(0 = not effective)
Behavior at error Fixed current value In the case of an
error, the current
output supplies the
current value defined
in the Current with
error field (any in the
range 0 ... 21 mA).
Unchanged In the case of an
error, the current on
the output remains
unchanged.
Setting Selection/Values Explanation