4 deleting a link with an output, Deleting a link with an output -14, Ee section 4.4) – YSI IQ SensorNet DIQ/CR3 User Manual
Page 28

Settings
MIQ/CR3; DIQ/CR3
4 - 14
ba76032e01
01/2012
4.4
Deleting a link with an output
If a link from a current or relay output with a sensor is no longer
required, the link can be deleted.
The following steps describe operation with the 2020 XT system. With
the System 182 XT, the outputs of the DIQ/CR3 can be found directly
under the Settings menu (see system operating manual of the DIQ/
S 182 XT).
Fig. 4-14 150 - Settings of outputs and links:Erase link
1
Open the Settings menu with
s
.
2
Using
d
and
g
, select and confirm the menu item, System
settings -> Settings of outputs and links.
The Settings of outputs and links display opens.
3
Highlight the column & with
d
and confirm with
g
.
4
Highlight a linked output with
d
and confirm with
g
.
5
Select Erase link with
d
and confirm with
g
.
A security prompt appears.
6
Select Erase link with
d
and confirm with
g
.
The link is deleted.