YSI 6500 Environmental Process Monitor - Manual (Page 39)

System Setup Section 3
Note that the current software version and date are shown in the first entry. This information will
be useful when contacting authorized service personnel for advice on the capabilities of your
system.
The second entry in the System status menu is “Wiper Interval”. If your sonde is equipped with a
YSI #6026 turbidity sensor, highlight the Wiper Interval, press enter, and use the arrow keys to
set the number of minutes between wiper activation cycles. The frequency of activation will be
dependent on the fouling present in your application. In most cases, a wiper interval of five
minutes will be appropriate.
YSI Incorporated 6500 Environmental Process Monitor 35